Racingline Rear Camber Control Arms MQB/EVO

Racingline Rear Camber Control Arms – MQB/EVO Platform (VWR501001)

The Racingline Rear Camber Control Arms are the ideal partner to any lowering setup, giving you full adjustability over your rear suspension geometry. Whether you’ve fitted coilovers, lowering springs, or simply want to fine-tune your alignment for road or track use, these arms let you set your rear camber exactly where it needs to be.

Why You Need Adjustable Rear Camber Arms

When you lower a car, the suspension geometry changes. The most noticeable side effect at the rear is excessive negative camber, where the tops of the wheels lean inwards more than they should. This causes uneven tyre wear (typically on the inside edge), reduces the amount of rubber making contact with the road, and can leave the car feeling less planted than it could be.

The factory rear control arms are a fixed length, so there’s no way to correct this without replacing them. Racingline’s adjustable arms solve the problem directly, allowing you to restore correct camber settings and get the most out of your tyres and suspension.

Built From Solid Billet Aluminium

Each arm is machined from a single billet of 6061-T6 aerospace-grade aluminium, then hand-polished and finished in a gloss black anodised coating. This makes them considerably stiffer than the rubber-bushed factory items, which improves rear-end response and reduces unwanted flex under hard cornering or heavy loads.

Adjustment is straightforward thanks to a left/right threaded centre rod. By turning the central nut, you can lengthen or shorten the arm while it’s still fitted to the car, making alignment work much quicker.

Key Features

• Wide adjustment range to dial in precise rear camber on lowered or standard ride heights
• 6061-T6 billet aluminium construction for strength and reduced weight
• Increased stiffness compared to the flexible factory arms, sharpening rear-end feel
• On-car adjustment via a left/right threaded centre section
• Gloss black anodised finish for a clean, durable appearance

Fitment

These arms are designed for the Volkswagen Group MQB and MQB EVO platforms, covering a wide range of popular VW, Audi, SEAT/Cupra and Skoda models including Golf, GTI, R, S3, RS3, Leon and Octavia variants. Because coverage is broad, please use the vehicle lookup tool or check the Vehicle Fitment tab to confirm compatibility with your specific car.

Important Installation Note

A full four-wheel alignment must be carried out after fitment. Camber arms directly affect rear suspension geometry, so professional alignment is essential to set your camber and toe correctly and to avoid uneven tyre wear.

As an authorised UK dealer for Racingline Performance, Progressive Parts supplies these camber arms as a genuine, motorsport-developed upgrade for owners who want their suspension set up properly.

Applications

Please note, customers are wholly responsible for checking fitment for their vehicle.